Kluson USA Replacement Zinc Nashville Tune-O-Matic Bridge
Kluson USA® Replacement Zinc Nashville Tune-O-Matic Bridge
Kluson USA® cast zinc bridge with zinc saddles. Slotted adjustment for intonation and height. This is an awesome OEM bridge for builders or the DIY repairman and offers a longer adjustment area than the original ABR-1 bridge. It matches Gibson® specifications and is a drop-in, non-modification required replacement part.
- Saddle Material = Zinc
- Thread = M5 - 0.8 Metric (as used by Gibson on Nashville Models)
- Post to Post Spacing = 2.93 in. (74.5mm)
- Saddle Notch = Center Notched Saddles
- Post/Thumbwheel Material = Standard Plain Post Brass
- Radius = 12 inch
- Post Top Diameter = .195 Inches / 4.95mm
- Bridge Center To Center Spacing = 2.93 inches
- Saddle Spacing = 10.4 mm
The best replacement for Tune-O-Matic
I've tried multiple different Tune-O-Matic style bridges from several different vendors on my Gibson SGs. I've tried cutting my own saddle slots, using roller saddles, and so on and so forth. But these are the most stress-free, painless, drop-in options out there. Can't recommend them highly enough. And the weight from aluminum is great for sustain.
Just installed it sounds great makes the guitar sound excellent great tone perfect fit just a little intonation adjustment excellent bridge
Fit into my Gibson SG like a glove and its pre notched saddles lined up perfectly with the pickups and nut too. It instantly resolved an issue I was having with the guitar. Its original bridge rattled, buzzed and produced an unusual sitar like sound on the higher strings. I thought it was the frets at first but it turned out to be the bridge, hence my order. Now that the Kluson is on the guitar it plays and sounds great! Even managed to lower the action as well! No rattling, no buzz, no sitar-like-sound. An excellent product, highly recommended!!!